AKZ149, AKZ329, AKZ439
*1.The cooling capacity represents the value at the standard poin（t inlet oil temperature: 35℃, room temperature: 35℃, oil for use: ISO VG32）. The tolerance of the product is approx.±5%.
*2.Be sure to use a commercial power supply for the power source. The use of an inverter power supply may cause burn damage to the unit. The voltage fluctuation range should be within ±10%. If the voltage fluctuation range is more than ±10%, please consult us.
*3.There are three types of different voltage specifications depending on the power source: －046, －047 and －048 units. －047 and －048 units deal with the different voltage by featuring a transformer. The main circuit voltage is the transformer’s secondary side voltage of 200 VAC, 50/60 Hz. (－046 units have no transformer and therefore have the same external dimensions and mass as standard units. Their main circuit voltage is 220/230 VAC, 50/60 Hz.)
*4.The machine temperature synchronous thermistor optionally available is required for this function（. Refer to Page 19 for details.
*5.The MSDS（Material Safety Data Sheet） of refrigerant R410A is attached to ーC type.
*6.Electric component box ingress protection: IP54 or equivalent (However, use piping conduits etc. rated at least IP54 at wiring ports.)*7.The specifications for withstanding vibration during transport are those of a standard unit.
*8.The molded-case circuit breaker is not supplied with this product. Please prepare it by yourself.
*9.The yellow line on the tank oil level gauge shows the highest oil level and the red line the lowest oil level.
*10.The maximum power consumption/maximum current consumption of different voltage specifications are shown in the tables below.